Groteskh - 12-20-2015 at 09:23 AM
Hello oud there!
as a new member I would like to introduce myself with a drawing to the strings intervals, I have found in this forum 
thanks!
[file]37717[/file]
fernandraynaud - 12-21-2015 at 01:59 AM
Welcome to the Forhum, Herr Groteskh!
Hibari-San - 12-23-2015 at 06:19 AM
Hi Groteskh !
This is very nice & helpful !! Thanks for sharing.
Can I post this to my dimension guide thread ?
Groteskh - 12-24-2015 at 07:37 AM
Hi
This drawing should be available for anyone who is interested, also for general public!
You can feel free to post it!
Frohe Weihnachten :)
Dr. Oud - 12-24-2015 at 01:28 PM
The string spacing is determined by the angle of the neck/fingerboard and the string length. There is no standard string spacing since the string
length and fingerboard dimensions are variable among oud designs. The spacing is the result of the 1st and last string positioned 2mm inside the edge
of the fingerboard, and 2mm between each pair at the top nut and 3mm at the bridge. The spacing between the pairs is the result of a calculating the
result of the neck width at the top nut minus the spacing between the pairs, divided by 5. The angle between the edges of the neck will determine the
spread at the bridge.
Your illustration appears to be of a lute, not like any oud I've seen.
GiorgosVal - 1-28-2018 at 10:59 PM
Hello there, nice to meet you! I'm a new to this forum, and a learner oud maker! Right now I'm about to complete my first turkish oud, and I need some
information about the strings spacing, in order to be able to adjust the bridge and the nut...
In brief, the oud has 58.5cm scale with 20.5cm fretboard. The width of the fretboard is 37.5mm at the nut and 49mm at the junction. I also bought La
Bella strings.
As I read above, the 1st and 11th string should have 2mm space from the edge fo the fretboard.
Also, a string of a pair should have distance of about 2mm with the string of the same pair.
So, knowing these, we calculate the spacing if the pairs.
My question is, do these dimensions refer to center-to-center measuring? Or it doesn't really matter?
Also, are these dimensions standard, or is there a range with minimum/maximum value?
e.g. 1.5mm or 1mm distance from the edge of the fretoard is acceptable?
Also, someone told me that the space between the strings of a pair should be around 0.7-1.0 mm (not center-to center), and someone else told me 2.0
mm, but I don't know which is the correct...
Nice again to meet you, and thanks to anyone that will help!