Mike's Oud Forums
Not logged in [Login - Register]
Go To Bottom

Printable Version  
Author: Subject: paste wax?
Jonathan
Oud Junkie
*****




Posts: 1582
Registered: 7-27-2004
Location: Los Angeles
Member Is Offline

Mood: No Mood

[*] posted on 6-27-2005 at 10:04 AM
paste wax?


I know we have touched on this area before, but I couldn't find this specific question on the old posts. Is there anything wrong with using a paste wax on the bowl of the oud? It seems like it would be protective, and bring out the beauty of the wood, without gunking it up with a bunch of oil. Any thoughts? I have an older oud, and I think the wood could look just great if it was cleaned up and some wax applied, but I don't want to do a thing without your thoughts.
Thanks
Jonathan




View user's profile Visit user's homepage View All Posts By User
Haluk
Oud Junkie
*****




Posts: 419
Registered: 2-6-2004
Location: Aydin-Turkey
Member Is Offline

Mood: oud and saz producer

[*] posted on 6-27-2005 at 10:24 AM


Hi Jonathan,

If the bowl varnished,you can apply paste and polish.
If the maker used gomalacca,paste and polish may be harmful.

Regards.




View user's profile Visit user's homepage View All Posts By User This user has MSN Messenger
Jameel
Oud Junkie
*****




Posts: 1672
Registered: 12-5-2002
Member Is Offline

Mood: No Mood

[*] posted on 6-27-2005 at 10:27 AM


There's nothing at all wrong with using paste wax. Make sure it's just standard paste wax, though. Some paste wax has abrasives in it that is designed to buff out the finish. Stay away from this unless you know what you are doing. Remember that applying a paste wax is temporary. It's not a finish. It will bring up a nice shine on an already finished surface. If your oud has lots of dull spots, it's better to refinish the bowl or add to the finish. The wax is just temporary, and in the case of an oud bowl that gets much more abrasion than say a cabinet or table leg, very temporary. Oud bowls that are finished well do not really need a paste wax. You can probably get Minwax wax at any hardware store. Just like waxing your car. Rub a lint free rag into the wax and wipe it on in a thin coat. Let it dry a couple minutes and buff with a clean rag. You should look into finishing info at http://www.taunton.com. The back of an oud is really no different than a peice of fine cabinetry and can be maintained the same way.



View user's profile Visit user's homepage View All Posts By User
Jonathan
Oud Junkie
*****




Posts: 1582
Registered: 7-27-2004
Location: Los Angeles
Member Is Offline

Mood: No Mood

[*] posted on 6-27-2005 at 10:31 AM


Thanks, guys. I appreciate it.



View user's profile Visit user's homepage View All Posts By User
Jonathan
Oud Junkie
*****




Posts: 1582
Registered: 7-27-2004
Location: Los Angeles
Member Is Offline

Mood: No Mood

[*] posted on 7-21-2005 at 07:33 AM


The paste wax works fine, but I think I found something even better. It is called Guardsman Cream Furniture polish. Another oud player told me about it. He used it on his Karibyan, and on an old Manol, and I swear it looked like they had just been re-finished. A really awesome glassy finish. It's easy to use, and I can't get over the results.



View user's profile Visit user's homepage View All Posts By User
billkilpatrick
Oud Junkie
*****




Posts: 563
Registered: 1-3-2004
Location: italy
Member Is Offline

Mood: what?

[*] posted on 7-21-2005 at 10:46 AM


jonathan - i prefer a slightly matt finish to the wood. i don't know if it's wise to do this but i put a thin layer of pure bee's wax on the bowl and rub it in for hours - could be psychological ... i don't know. not on the neck, as it tends to retain grime from one's hand - no matter how much i wash my hands prior to playing - particulary in hot weather. i don't think putting any sort of wax on the face would be a good idea but if there's a good protective layer of varnish between the wax and wood, bees wax gives a lovely deep, lustrous shine on the bowl.

- bill
View user's profile Visit user's homepage View All Posts By User

  Go To Top

Powered by XMB
XMB Forum Software © 2001-2011 The XMB Group