oudplayer
Oud Junkie
Posts: 849
Registered: 5-9-2004
Location: new jersey/ Israel
Member Is Offline
Mood: ouds up
|
|
pre amps
hey all
can someone tell me what exacly does a pre amp do
bc i am planing on getting a K&K twin spot which i hear dwas great for ouds and i wanna know if i need a pre amp
thx sammy
and you you think i should get a K&K pre amp or whast good for it
|
|
|
Jason
Oud Junkie
Posts: 734
Registered: 9-17-2005
Location: Louisville, KY
Member Is Offline
Mood: Loving my oud
|
|
A preamp accepts a line level signal and can boost the signal or shape the tone. Most amps have a preamp and poweramp section. The tone shaping is
taken care of in the preamp and the actual amplification is taken care of by the poweramp. If you're going to be playing through an amp with an EQ
and stuff I don't see why you'd want an onboard preamp unless you just want the option to change things whilst playing.
I don't have experience with those pickups though so I could be wrong.
|
|
|
jshead
Oud Junkie
Posts: 101
Registered: 10-2-2005
Member Is Offline
Mood: Peace
|
|
You probably do need a pre-amp for the K&K twin spots. I bought a nice Fishman pre-amp for my pickups. As Jason says the pre-amp boosts the
signal coming from the pickup. Generally, pick out put is very low. You can keep the little pickup pre-amp close by for each volume adjustment. Not
all preamps have tone controls.
|
|
|
Monty88
Oud Junkie
Posts: 135
Registered: 8-15-2004
Member Is Offline
Mood: No Mood
|
|
preamps
Jshead is right,
Preamps boost the signal of piezo contact pickups which are generally quite low in output. I have been told however that the K&K pickups do not
require a preamp to the extent of cheaper pickups, the twinspot apparently has a lot of volume.
I recently bought a L.R Baggs Para Acoustic D.I. It is awesome, great for absolutely any acoustic pickup.
I will post a comparison soon, I use on my Turkish oud a Barcus Berry transducer, which sounds fantastic, but when you combine it with the Para
acoustic DI the results are phenomenal. The volume is loud enough anyway, but the sound is so much more shapable. It sounds very natural and clean.
I've used this preamp with my oud, cumbus, sazes (they now come in Turkey with undersaddle pickups, and some with onboard fishmans  . It works fantastically for contact piezo pickups and bridge pickups. It works with
magnetic pickups as well on greek bouzoukis and cretan laouto, these don't sound natural but you can adjust the tone which is so classic to the live
greek sound.
As well as mandolins and good old guitar, I really reccomend
The L.R. Baggs Para Acoustic DI.
Soon i will post a comparison of my oud plugged straight into the computer with no preamp, then a soundfile of the pickup through the preamp.
|
|
|
oudplayer
Oud Junkie
Posts: 849
Registered: 5-9-2004
Location: new jersey/ Israel
Member Is Offline
Mood: ouds up
|
|
hey all
how sticky are these twin spot if i install them under the face will they get undone and fall off or do i need to put electrip tape to hold it down
thx sammy
we are lost camels in the desert and wanna find our way to water and the water is in aden
|
|
|
Dr. Oud
Oud Junkie
Posts: 1370
Registered: 12-18-2002
Location: Sacramento, CA, USA
Member Is Offline
Mood: better than before
|
|
| Quote: | Originally posted by oudplayer
hey all
how sticky are these twin spot if i install them under the face will they get undone and fall off or do i need to put electrip tape to hold it down
thx sammy |
The internal mounting should be done with a drop of epoxy.
|
|
|
billinpitt
Oud Lover
Posts: 16
Registered: 11-16-2006
Member Is Offline
Mood: No Mood
|
|
I have good things to say about L.R baggs para di with any stringed instrument. I have the K and K twin on my oud and it sounds really nice. My only
complaint is the jack is very microphonic and you have to be careful not to move too much.
Sansamp makes a nice DI type preamp as well which works great with acoustic guitar. I have not tried it with the oud yet. It seems to shape the
sound a bit more than the Baggs, but in a pleasing way.
|
|
|
stringmanca
Oud Junkie
Posts: 224
Registered: 8-4-2005
Location: Martinez, CA
Member Is Offline
Mood: Oud Moud
|
|
I just came across this preamp in the new Sweetwater catalog and thought it looked promising, especially for multi-instrumentalists:
Radial Tonebone PZ-Pre
http://www.tonebone.com/tb-pzpre.htm
Anyone have any experience with these?
|
|
|
Sazi
Oud Junkie
Posts: 786
Registered: 9-17-2007
Location: Behind my oud
Member Is Offline
Mood: مبتهج ; ))
|
|
Hi Sammy, I've used the k&k twin spot on many ouds and sazes, they really don'y need a pre-amp but if you want more control over your sound a
pre-amp is the way to go.
I have heard from others and now I have one I agree, that the k&k pre's are not that good.
The pre's listed in the above posts are probably the better ones, personally I prefer mic's but if I have to use a pick-up I use a Fishman Pre EQ II ,
as I have a tight budget, but it does everything I need, and sounds great.
Yes, but try them with the sticky tape first, as it can make a huge difference in sound depending where you put the transducers, and you will probably
move one or both a few times before you find the sweet spots, then once you are happy mark the positions and glue them, I believe k&k recommend
using superglue.
|
|
|
Jaffa Road
Oud Maniac
Posts: 73
Registered: 1-30-2011
Member Is Offline
|
|
in my experience you need some kind of preamp for shaping the tone. for example, you might set the eq to something that sounds great in your living
room, but then when you get to the gig, and you are in a bigger room, with your ensemble, what sounded great at home, now has way to much bass, or
mid, or whatever, so you need to be able to adjust.
You also get different "eq" from where you stick the pick up and this can make a huge difference to output tone.
All of the preamps mentioned so far by other posters are standard professional grade pre amps for acoustic instruments.
That radial tone bone that you mention looks great - I have not tried it but that unit was reccomended to me, and generally their stuff is very well
designed, built and high end.
Fishman Aurapro is worth considering also.
|
|
|
fernandraynaud
Oud Junkie
Posts: 1865
Registered: 7-25-2009
Location: San Francisco, California
Member Is Offline
Mood: m'Oudy
|
|
There are three things a preamp does with a piezo pickup.
1- boost the signal. Sometimes needed, often not.
2- provide tone/eq controls near the player's reach. Handy.
3- match impedance. This is seldom understood. Impedance is resistance, but where resistance is constant, impedance changes with frequency. But for
practical purposes, it's resistance.
A pickup will sound very different depending on the electrical "load" it is connected to. A low resistance, low impedance load decreases the signal,
it's too much current demanded for the weak generator that the pickup acts like. A very high impedance allows the pickup to "open up", as the load is
practically invisible. Open air has almost infinite impedance, but to convey the signal, SOME load is needed, SOME current has to flow.
Most mixers and sound cards have line input impedance around 50,000 ohms. That's fine for connecting a tape recorder or CD player, that have low
impedance outputs, that can drive stiffer loads. But guitar amps generally have input impedance around 10,000,000 ohms, which is like a feather.
That's why an electric guitar connected to a guitar amp sounds so different from a guitar connected to your home stereo. Same with an oud with piezos,
piezos sound different with a lighter load. K&K duals can work OK directly connected to a mixer, but sound different on a high impedance input.
A preamp is a very simple circuit. A direct box, or DI, is a pre-amp with no tone controls, sometimes not even volume controls and no boost, just a
high impedance input used to plug guitars into a mixer. ART makes AC powered DI preamps with tubes and compression ability that give a fat sound at
under $50, though it takes some trial and error, switching tubes etc, even this works, at $29:
http://pro-audio.musiciansfriend.com/product/ART-Tube-MP-Studio-Mic...
More tone controls add parts cost. You can find unpackaged battery powered preamps as little circuit boards on eBay for $20. Even ones with many bands
of tone control, in enclosures designed for mounting in or on guitars, for under $50. You can adapt them to an oud, make your own box.
A circuit may be more or less flattering to a specific pickup. A phase reversal switch is very important in combatting feedback. But you can get this
very inexpensively. Beyond that, the nicer the packaging, the more famous the name, the higher the price. People who can afford $700 preamps I am sure
will like them, but the position of the piezos on the oud will have more effect on the sound.
|
|
|
Jaffa Road
Oud Maniac
Posts: 73
Registered: 1-30-2011
Member Is Offline
|
|
"People who can afford $700 preamps I am sure will like them, but the position of the piezos on the oud will have more effect on the sound. "
great point fernandraynaud
just like when recording, proper microphone placement of a $200 mic will always yield way better results than a poorly positioned $5 000 mic
|
|
|
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
