| Pages:
1
2
3 |
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
The classic walnut oud
Hi my oud brothers,
Having been motivated by you all and in particular by Alfaraby  , I am embarking
on my new quest to build a classic syrian style walnut oud with the traditional fittings (3 sound hole, fixed bridge, tasteful classic inlays). I have
had this nice piece of walnut for about 4 years now and it was time to make a oud out of it. I cut it in a way that about half the grain is a sap wood
and the other half is heart wood. Should be a cool patern develop as a result much like the nahat replica made by Ahmad the kuwaiti.
I will take my time with this one but it will be for sale at completion so if you are interested feel free to contact me to reserve the oud once
finished. Just cant promise when as I have a 15 month old lady keeping me very busy.
[file]30554[/file] [file]30556[/file] [file]30558[/file] [file]30560[/file] [file]30562[/file] [file]30564[/file] [file]30566[/file]
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
muhssin
Oud Addict
Posts: 39
Registered: 3-28-2013
Location: Germany
Member Is Offline
|
|
wow good luck Samir
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
Thank you,
I will need it.
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
Alfaraby
Oud Junkie
Posts: 796
Registered: 9-18-2009
Location: Holy Land
Member Is Offline
Mood: Cool
|
|
Thanks Samir. I'm flattered. 
If you ever need anything, please contact me. I may help with the rosette, fingerboard and pickguard designs.
Can't wait to see it happen.
I'd recommend, if I may to:
1) carve the neck & tail blocks to reduce their weight as much as you can go;
2) assemble each rib opposite to the other, making even greater design, like Michel Khawwam's I've posted here: http://www.mikeouds.com/messageboard/viewthread.php?tid=14474#pid98... , no spacers in between;
3) make a neat pegbox, Nahhat style, 12 holes;
4) make it a 615 mm scale, full Arabian masculine size, with an extended FB;
5) make a deep bowl, at least 190 mm deep. Adding depth shall enlarge the sound box and ensure more basses;
6) make a 3 round holes soundboard, using master grade, either spruce or cedar ;
7) use a dark burl wood veneer for the pickguard;
8) read all the posts of the forum
Good luck dear friend
Yours indeed
Alfaraby
alfarabymusic@gmail.com
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
Thanks for the Nahat style specifications AlFaraby.
I will try to stick to them.
My only issue is the 61.5 for the scale. I find it's a bit long and sounds good only when you tune down. Otherwise the strings are rather tight.
What's your take on that? Aren't there some Nahat's at 60cm? My abdelaziz al lissi Oud comes in at 63cm! It's a heavyweight
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
Alfaraby
Oud Junkie
Posts: 796
Registered: 9-18-2009
Location: Holy Land
Member Is Offline
Mood: Cool
|
|
No dear ! I happen to see 610 mm scale Nahats, not 600.
630 mm is a common scale as well. I'm a bit zealous regarding the scale length, therefore none that falls from 610 mm would ensure the bassy sounds we
all are out for.
Good luck
Yours indeed
Alfaraby
alfarabymusic@gmail.com
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
well, I am going to face some delay building this project. I have to find some better walnut.
the wood I had selected is refusing to play nice and I broke 5 ribs now being careful as possible. I think it may be due to the way the walnut was
cut, on the quarter as opposed to flat sawn. It cracks in many little places at the most steep section of the curve.
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
Some progress :)
So I overcame the bending hurdle I had, I think the wood extra dry given we are just out of winter and I have had it stored many years.
some interesting shots in my workshop. I really wish I had a window in there sometimes but I pretty much always work when its dark out anyways so
perhaps not as important as I feel.
I have got 2 ribs on already, I will share more pictures as I progress.
[file]30816[/file] [file]30818[/file] [file]30812[/file] [file]30814[/file]
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
Fritz
Oud Junkie
Posts: 246
Registered: 6-14-2012
Location: Northest Germany
Member Is Offline
|
|
Quote: Originally posted by SamirCanada  | So I overcame the bending hurdle I had, I think the wood extra dry given we are just out of winter and I have had it stored many years.
some interesting shots in my workshop. I really wish I had a window in there sometimes but I pretty much always work when its dark out anyways so
perhaps not as important as I feel.
I have got 2 ribs on already, I will share more pictures as I progress.
|
Hi Samir
I like to see your progress in Oud-making ! I would like to see more people trying to give life to old traditions like instrument-making by hand.
But, my question is : I often see the bent ribs tied together to hold the bent curve, like you have... but... I do not tie them... because : The outer
rib will have another curve than the inner rib... the radius grows with the distance from the center of the curve !
Does ist not come to complications during the adapting of the ribs because of the (forced) different curve ? I would mention, that the body tends to
be a bit asymmetrical while growing rib for rib.
Best wishes
Fritz from Germany
Music is the food for the soul
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
Hi Fritz,
I bend all the ribs at the approximate shape. Of course everyone of them has to be also cut to the shape then re-bent and tweeked to the exact shape
so it can match the previous rib. I tie them so they stay in one place together while I work on the bowl.
Also, remember that I am trying to make a special pattern with this log. so I also tie them toegether so I dont loose track of which rib goes where.
They are in order.
here is a quick pic of my progress, I am actually up to 7 ribs in now just havent taken a picture yet. You get the idea...
[file]31002[/file]
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
paulO
Oud Junkie
Posts: 531
Registered: 9-8-2004
Location: California
Member Is Offline
Mood: Utz
|
|
That's some beautiful walnut you got going there !!! Thanks for posting the progress.
Regards,
PaulO
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
Thanks BrotherO
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
hussamd
Oud Junkie
Posts: 117
Registered: 12-18-2013
Location: Bartlett, IL
Member Is Offline
|
|
We need a thumbs-up option on this forum. Looks beautiful already! Keep up the great work.
|
|
|
Fritz
Oud Junkie
Posts: 246
Registered: 6-14-2012
Location: Northest Germany
Member Is Offline
|
|
| Quote: Originally posted by SamirCanada | Hi Fritz,
I bend all the ribs at the approximate shape. Of course everyone of them has to be also cut to the shape then re-bent and tweeked to the exact shape
so it can match the previous rib. I tie them so they stay in one place together while I work on the bowl.
Also, remember that I am trying to make a special pattern with this log. so I also tie them toegether so I dont loose track of which rib goes where.
They are in order.
here is a quick pic of my progress, I am actually up to 7 ribs in now just havent taken a picture yet. You get the idea...
|
Hi Samir
Ah... only to hold the in one place on the workbench... that´s a reason :-)
I bend the woods (ribs), letting them dry for one night and day if the wood is bent wet), then I bend again (dry) until the curve matches. Before any
rib is bent, I lay the selected wood on the floor and changing the stripes until the pattern is good (grain, colour, orientation)... to give them
numbers written with a waterproof fiber pencil to give them the position they will have on the mould. Then I begin to bend the ribs... one for left,
one for the right side, pair by pair.
Ofcourse I got the idea seeing the pic, nice wood ! I have nearly the same grain and the change of colour, but my walnut isn´t as dark as yours. But
I will use another wood for the 1st (middle) rib, so all the next pairs of ribs will match crossing in grain. I think, you began with the middle rib,
and against this you take the next on each side to complete the pattern. But... there will be an asymmetrical pattern resulting ? Therefore I use to
take a straight grained wood for the 1st rib to give the meaning of the middle of the ribs and of the Oud itself.. and every pair of ribs will be like
the other on one to the other side on the completed bowl.
I sometimes thought of making a bowl without a "middle"rib to match the need given by such nice grained and coloured wood... placing them bookmatched
on the mould without a center rib. Do you think, it´s worth a try ? Or will it completely be unusual ?
Kind regards
Fritz
Music is the food for the soul
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
I do the same as for the bending my friend.
I know it will be uneven because of the uneven amount of ribs and the center rib... I think when the bowl is finished you will not be able to spot
these with the naked eye unless you really are looking for it.
You are right, making a bowl with an even number of ribs and without a center rib could be a solution for perfect but maybe its not as strong if the
center rib is missing and it is instead a glue joint?
I like the different wood rib in the middle like you describe, I think it should be also acompanied by the last 2 on each side *the ribs that connect
with the soundboard. They should be all the same wood. looks nice
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
Fritz
Oud Junkie
Posts: 246
Registered: 6-14-2012
Location: Northest Germany
Member Is Offline
|
|
| Quote: Originally posted by SamirCanada | I do the same as for the bending my friend.
I know it will be uneven because of the uneven amount of ribs and the center rib... I think when the bowl is finished you will not be able to spot
these with the naked eye unless you really are looking for it.
You are right, making a bowl with an even number of ribs and without a center rib could be a solution for perfect but maybe its not as strong if the
center rib is missing and it is instead a glue joint?
I like the different wood rib in the middle like you describe, I think it should be also acompanied by the last 2 on each side *the ribs that connect
with the soundboard. They should be all the same wood. looks nice
|
Samir :-)
Wow... that´s a fast answer :-)
Yes... as I mentioned... but... who would notice the glue joint as the middle instead a rib ? :-) May be I´ll try one example building with an even
number of ribs to see how it works... and looks. You´re right, no one will see the dismatching outer ribs when not just exactly looking for a
difference... but... I would have this in mind... and that´s reason enough for me not to do it :-)) You have to know : I have an extremely mind for
symmetrics...
I don´t think it´s a bad choice to match the ribs perfectly, and even if the amount is not uneven, the look of the bowl allows a try :-)
But better with a center rib, perhaps in a contrasting colour... and ofcourse the last ribs, wearing the face, have to be the same wood... A nice
imagination, when the wood cries for bookmatched positioning :-) The sides of the pegbox in the same wood as the center rib, the bottom made of an
equal like the rest of the bowl. (An Oud is growing in my mind :-))
We will see... anyway :-) (perhaps in some pics)
Best wishes to you
Fritz
Music is the food for the soul
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
I want to share with everyone my new facebook page where you can all follow my work.
It will prevent me crowding the space here with too many pictures.
https://m.facebook.com/profile.php?id=754265281252695
I made some progress as you can see only 5 ribs to go now
thank you,
Samir.
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
Fritz
Oud Junkie
Posts: 246
Registered: 6-14-2012
Location: Northest Germany
Member Is Offline
|
|
Hi Samir
I knew it : This must result in a very fine looking... the grain and colour is well tuned to the ribs... I wait for the pics showing the whole bowl
!
Wishing good progress...
Fritz
Music is the food for the soul
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
updates
Hi my oud brothers,
finished the bowl a few weeks ago now, went to Cuba for a wonderful family vacation and now back on track ready to start with the rest of the oud.
Here we see shots of the bowl which still needs some scrapping and also some of the pegbox sidewalls which will be made of soft maple and walnut
exterior. The neck blank was roughed out in walnut as well. The string length will be 61.5 in keeping with the traditional measurements described by
our friend AlFaraby.
Please like my facebook page for more pictures and updates.
https://m.facebook.com/profile.php?id=754265281252695
thank you,
Samir
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
some updates
I was side tracked with repairs and projects but I managed to complete the pegbox, the neck and the bridge for this instrument.
I now have the soundboard glued up and I am starting to think about how to finalize it. Those interested in purchasing this oud when its done who wish
to have some input on how I finish the rest of the oud (inlays, rosette, pickguard etc...)
please contact me at the email below.
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
I have made some progress on the face now. next step is to thin the face to final thickness and to instal the braces. the design is inspired by a
famous george hanna nahat model. this was a long but rewarding process
[file]32879[/file] [file]32881[/file] [file]32883[/file] [file]32885[/file] [file]32887[/file] [file]32889[/file] [file]32891[/file]
[file]32893[/file] [file]32895[/file]
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
BaniYazid
Oud Junkie
Posts: 225
Registered: 8-20-2010
Location: France
Member Is Offline
|
|
Wow, well done!
|
|
|
bulerias1981
Oud Junkie
Posts: 770
Registered: 4-26-2009
Location: Beacon, NY
Member Is Offline
Mood: John Vergara Luthier Lord of the Strings instrument making and repair
|
|
nicely done.. classic Nahat look
|
|
|
SamirCanada
Moderator
Posts: 3405
Registered: 6-4-2004
Member Is Offline
|
|
thank you guys.
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
Alfaraby
Oud Junkie
Posts: 796
Registered: 9-18-2009
Location: Holy Land
Member Is Offline
Mood: Cool
|
|
Samir dear
As I was part of the inspiration I'll ask to make the finest pegbox possible. A
big pegbox on a beautiful oud is just like a pretty lady with big hands !
Excuse me
We've dried out waiting for this beauty to be finished, so help us if you please
Thanks again for sharing
Yours indeed
Alfaraby
alfarabymusic@gmail.com
|
|
|
| Pages:
1
2
3 |
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
