ilovegreentea
Oud Lover

Posts: 22
Registered: 5-11-2016
Member Is Offline
|
|
Buzz/ring on nylon string
Hi everyone! I was hoping if anyone could advise me on this.
I have a buzzing/ringing problem on the nylon String 1. However it's only the string nearest to the edge of the fingerboard. 2 notes have this
problem; the one-third position where the neck and the body is joined, and a major 2nd below it. For the former, there was some unevenness at the
joint area, which I suppose could be solved when the joint is flat using a sandpaper. The tone below it is a problem I can't solve.
The oud is Turkish and has an extremely low action, lower than normal. I've got another luthier to remove material on the fingerboard and this helped
increased the action by a bit. It resonates better now with lesser buzz than before. The new problem now is the nylon buzz. I don't recall having this
problem before. Strings are fine, I've tried new and old ones.
Does anyone else experience any problems like this?
Thanks so much!!
|
|
MattOud
Oud Junkie
   
Posts: 298
Registered: 1-18-2017
Location: Ontario, Canada
Member Is Offline
Mood: Feeling Pretty G'Oud
|
|
One of our own great forum luthiers John V posted this video on buzzing:
https://www.youtube.com/watch?v=oPRvng77Hjk
Lots of great advice that covers buzzing problems..... Have you watch this as of yet?
Cheers.
ps: I cannot stand buzz either!
|
|