| Pages:
1
2 |
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Türünz Arabic Oud Strings
I have both Turkish and Arabic tuned ouds from Faruk Türünz. I bought the Turkish tuned first, loved it, and wanted to have one for Arabic tuning
too. When I bought the Arabic tuned oud I liked it even more than the Turkish tuned, although I like lower pitches more in general and it could have
been nothing more than chance, as I go back in forth liking different ouds and sounds more and less. Anyway, after I changed the strings on the
Arabic tuned oud, I never liked it again nearly as much as the Turkish tuned oud.
The strings that Faruk put on the oud were perfect. I believe they were Turkish Kürschner, but I have no idea what set they were, and I haven't been
able to get that information from Faruk or anyone at his shop. I've tried lots of different string manufacturers and sets, and I'm never perfectly
happy with any of them. With my Turkish tuned oud though, really every set I have tried have sounded great (standard D'addario are my current
favorites).
Today I think I may have finally figured out the issue. The string tension on my Turkish tuned oud feels substantially higher. I think the lower
tension strings on the Arabic oud are causing the issues that I don't like...buzzing caused by the strings hitting each other, a scratchier sound from
the pick due to the pick being in contact with the strings longer, etc.. Some of the sets I tried on my Arabic oud were Turkish sets tuned a whole
tone down, so that explains the lower tension with those sets. Some sets were for Arabic ouds, but I think they were just lower tension. And I've
had custom Pyramid Lute sets and Labella Lute sets put together. Right now I have a custom Pyramid Lute set, but when I compare it to the standard
D'addario strings on my Turkish tuned oud, the tension feels substantially lower on the Arabic/Pyramid Lute set. So I think what I need to do is try
a higher tension set on the Arabic tuned oud.
I've also thought of trying the D'addario Turkish set on my Arabic oud, with Turkish tuning...but on Brian's site he says not to do this ( http://www.oudstrings.com/index.php?route=product/product&path=... ) as the tension could be too high. Does anyone know if this would be the case for a Türünz oud, where the string length is the same as on
standard Turkish tuned ouds (58.5cm)?
I use D, G, A, D, g, c tuning on my Arabic oud, and the equivalent E, A, B, E, a, d on my Turkish tuned oud. The Pyramid Lute strings I've used on my
Arabic oud are:
D (1035)
G (1021)
A (1017)
d (1010)
g (PVF .63)
c (PVF .54)
Does anyone have any idea what the tension on those would be compared to the D'addario with E, A, B, E, a, d tuning? And, how can I get the same
tension as on the D'addario set with Pyramid Lute, but on my Arabic tuned oud?
Thanks!
EDIT: I think one issue with Türünz tuned Arabic ouds and Arabic oud strings is that the strings are meant for 60cm string lengths and Türünz
Arabic ouds have a 58.5cm string length...so they end up even lower tension.
|
|
|
Brian Prunka
Oud Junkie
Posts: 2939
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
The strings you have on there would be far too tense if tuned up a step, even a half step would be far more tension than I would consider (though it
might not damage the oud). Except the g, they are all in the approximately 3.5-3.7Kg range. As I recall, I originally suggested a heavier g, but it
wouldn't fit in the tiny holes that Turunz had in the bridge.
That said, with a 58.5cm scale, there is no reason why you can't use Turkish sets tuned Turkish.
But be aware that some Turkish sets are EABead and others are C#F#Bead. Tuning C#F# up to EA is a lot of extra tension in itself. Arabic sets,
unless they are custom, are geared toward 61cm, as the typical range is 60-62cm.
D'addario uses tighter windings on their string compared to Pyramid, Kurschner or LaBella, this makes the string inherently stiffer and makes the
tension feel higher than it is. Perhaps this is something you like.
I could figure out the comparable D'addario tension in Arabic tuning for you, but you will run into the problem of not fitting the treble strings in
the bridge holes.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Thanks Brian! If you could figure out the D'addario tension in Arabic tuning for me, I would greatly appreciate it...Pyramid Lute would be fine I
think. I may just have to get a luthier here to widen the hole spacing...finally.
I'll try the D'addario set with Turkish tuning and if that fixes the issues. Then I'll have my answer. If it does, then I'll try the Pyramid Lute
set with corresponding tension but for Arabic tuning...and I can have the holes drilled both wider and further apart.
|
|
|
Brian Prunka
Oud Junkie
Posts: 2939
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
Here are the stated tensions of the D'addario set, in the recommended tuning:
1 d' 2.94 Kg
2 a 2.67 Kg
3 e 4.75 Kg
4 B 4.43 Kg
5 F# 3.82 Kg
6 C# 3.36 Kg
Alternate tunings
5 A 5.4 Kg
6 E 4.74 Kg
6 B 2.71 Kg
To me, this is an OK set in the recommended tuning but I find the tension on the 3rd and 4th course excessive. Using the set in the tuning you said
you're using seems way out of balance on the 5th and 6th course. I'd be concerned about the tension causing damage here.
And I actually believe that there is an error in the calculation on the .025w 3rd course, and the tension is actually 5.01Kg not 4.75.
For reference, the tension on your Arabic oud (with the current Pyramid set) is:
c' 3.7 Kg
g 2.9 Kg
d 3.4 Kg
A 3.4 Kg
G 3.5 Kg
D 3.7 Kg
These should be very good tensions, though the g is a little light.
It seems strange to me that the oud doesn't respond well.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Thanks Brian!
You said you'd be worried about the tension on the 5th and 6th courses...but on your website you write that the set can be used for E, A, B, E, a, d,
right?
"The two lower courses are listed on the package as F# and B. A fourth lower means you can tune these pairs to C# and F# or E and A. For the
discerning player, tuning these pairs up to E and A might yield higher tension (but not too high by any means)."
If the tensions are ok on my Turkish tuned oud, would it be possible to put together a Pyramid Lute set with the same tensions for use on my Arabic
tuned oud?
Maybe the oud does respond well to most... It's just that to me, it doesn't respond nearly as well as the Turkish tuned oud with the higher tension.
I THINK it is the tension, but since I haven't tried a higher tension option, I'm not 100% certain.
|
|
|
Jody Stecher
Oud Junkie
Posts: 1373
Registered: 11-5-2011
Location: California
Member Is Offline
|
|
David, here is what has worked well for me on Arabic braced, Arabic tuned ouds with a scale of 58.5:
For the wound strings/ MusiCaravan arabic set
For the trebles/ first try the strings in the MusiCarvan set.
an alternative:
Savarez Alliance KF .052 or .055 for cc
Savarez Alliance KF .062 for gg
Brian sells MusiCaravan strings at a low price.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Thanks Jody. That is one set I have yet to try. I've tried the Necati Celik MusiCaravan set on my Turkish tuned oud and like it a lot. But when I
switched to EABead tuning I figured the tension would be too high on the thickest string. I do wonder if tension would be ok for DGAdgc tuning with
that MusiCaravan set, in terms of not being too high for the 5th and 6th courses.
...just looked...according to Brian's site it should be good for DGAdgc too, since the set is made for 60+cm ouds. I may not like this tension
though, since they are designed for larger ouds.
|
|
|
Brian Prunka
Oud Junkie
Posts: 2939
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
Quote: Originally posted by DavidJE  | Thanks Brian!
You said you'd be worried about the tension on the 5th and 6th courses...but on your website you write that the set can be used for E, A, B, E, a, d,
right?
"The two lower courses are listed on the package as F# and B. A fourth lower means you can tune these pairs to C# and F# or E and A. For the
discerning player, tuning these pairs up to E and A might yield higher tension (but not too high by any means)."
If the tensions are ok on my Turkish tuned oud, would it be possible to put together a Pyramid Lute set with the same tensions for use on my Arabic
tuned oud?
Maybe the oud does respond well to most... It's just that to me, it doesn't respond nearly as well as the Turkish tuned oud with the higher tension.
I THINK it is the tension, but since I haven't tried a higher tension option, I'm not 100% certain. |
Hmm. Some of the descriptions on my site were written by Jameel before I took over. That's definitely his description and I admit I just took his
opinion there and didn't reconsider it. I had felt that it might be kind of high if tuned up to EA but hadn't made it a point to do the calculations.
Now that I have, I'm going to revise the description.
Confusingly, D'addario is now publishing tensions here lower than the calculations yield (these calculations are from D'addario's own data). I've sent them an inquiry to try and clear this up.
I'm out of MusiCaravan strings at the moment, but am planning to get more.
I have the KF strings in .52 and .55, but not .62, which seems quite light to me. I have .69, which I've had decent results with.
I could supply Pyramid lute strings heavy enough to mimic the D'addario Turkish tension on a 58.5cm oud in Arabic tuning, but honestly the tension
seems really excessive to me.
|
|
|
Brian Prunka
Oud Junkie
Posts: 2939
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
The MusiCaravan set is medium tension and if you don't like the tension of the Pyramids you have, I doubt it would be an improvement. It responds
nicely on 60+cm ouds but the trebles are a bit light on a shorter oud.
I am inclined toward a more incremental approach. Since the average tension of your current Pyramid set is about 3.4Kg and the average tension of the
Turkish tuning D'addario is about 4.1Kg, I'd be inclined to aim more towards 3.7 - 3.8 Kg rather than jumping all the way up to 4.1 Kg.
Since experimenting with Pyramid is a bit expensive, we could try D'addario first.
|
|
|
Brian Prunka
Oud Junkie
Posts: 2939
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
I'm surprised that Turunz won't tell you what strings were on it when you got it. I'd expect Kurschner strings. I'll try asking my Kurschner contact
if there is a particular set he supplies to Faruk.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Thanks again Brian. All good and useful information.
Sorry for the hassle, but I think this all just may be me being overly obsessive. My friend Omar (forum member here) was just at my place playing
both of the ouds, and not only does he like the Arabic tuned oud a bit more, but he doesn't find any problem with scratchiness or buzzing. He showed
me various videos of people playing, including Simon Shaheen, and there really is the same level of buzzing and pick sounds. For some reason I hear
it less on my Turkish tuned oud. Maybe it does have something to do with the tension being higher, or just the sound of that oud in general. And in
any case, when someone else plays the ouds the pick sounds and slight buzzing doesn't bother me at all. For some reason when I'm playing I just pay
too close attention to that.
I know Mavrothi uses the D'addario strings with the same tuning as I use. He's the one that recommended I try that tuning, and using the D'addario
strings. But...I will consider that...that you feel the tension is too high. Thanks again!
|
|
|
Jody Stecher
Oud Junkie
Posts: 1373
Registered: 11-5-2011
Location: California
Member Is Offline
|
|
MusiCaravan also has a Turkish set intended for your tuning.
| Quote: Originally posted by DavidJE | Thanks Jody. That is one set I have yet to try. I've tried the Necati Celik MusiCaravan set on my Turkish tuned oud and like it a lot. But when I
switched to EABead tuning I figured the tension would be too high on the thickest string. I do wonder if tension would be ok for DGAdgc tuning with
that MusiCaravan set, in terms of not being too high for the 5th and 6th courses.
...just looked...according to Brian's site it should be good for DGAdgc too, since the set is made for 60+cm ouds. I may not like this tension
though, since they are designed for larger ouds. |
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Oh...Türünz did tell me they were Kürschner strings...just couldn't get him to tell me which set.
|
|
|
Jody Stecher
Oud Junkie
Posts: 1373
Registered: 11-5-2011
Location: California
Member Is Offline
|
|
| Quote: Originally posted by Brian Prunka | | Quote: Originally posted by DavidJE | Thanks Brian!
I have the KF strings in .52 and .55, but not .62, which seems quite light to me. I have .69, which I've had decent results with.
|
Savarez is vague or protective about saying what the KF strings are made of. It's something along the lines of PVF where much lighter gauges produce
tensions equivalent to thicker gauges in nylon. I've used the .62 on my Turunz oud braced and tuned for Turkish music and the aa is perfect with .62
in that context as well. |
|
|
|
Brian Prunka
Oud Junkie
Posts: 2939
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
| Quote: Originally posted by Jody Stecher |
Savarez is vague or protective about saying what the KF strings are made of. It's something along the lines of PVF where much lighter gauges produce
tensions equivalent to thicker gauges in nylon. I've used the .62 on my Turunz oud braced and tuned for Turkish music and the aa is perfect with .62
in that context as well. |
Yes, I've heard different things from different sources but I am fairly certain that " "KF" is actually PVF or some very similar formulation (akin to
the varieties of nylon available).
Part of this seems to be confusion about what "PVF" strings actually are. There seems some indication that they are really "PVDF", even possibly the
ones called "PVF". So in this case, Savarez would be correct in saying that their strings are "not PVF", since they are PVDF, but confusing in that
other strings marketed as "PVF" are in fact also "PVDF".
Here is the patent for PVDF strings, which sources indicate is/was the supplier for Savarez's KF series.
http://www.google.com/patents/US4833027
When I have some time, I will do some comparative calculations using Pyramid's "PVF" data and Savarez'z "KF" data, as well as the actual published
densities of PVF and PVDF.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Thanks Jody. I'm happy with the D'addario set, but maybe I will give the MusiCaravan a try just since the tension may be safer, to see if I like them
as much.
|
|
|
Brian Prunka
Oud Junkie
Posts: 2939
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
| Quote: Originally posted by Brian Prunka |
And I actually believe that there is an error in the calculation on the .025w 3rd course, and the tension is actually 5.01Kg not 4.75.
|
So I just talked with D'addario and was told that the published density on the .025 is correct—it is actually lighter than the .024. My calculations
are still higher than the tensions listed on D'addario's site, but hopefully they can clear that up as well.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
| Quote: Originally posted by Brian Prunka | I am inclined toward a more incremental approach. Since the average tension of your current Pyramid set is about 3.4Kg and the average tension of the
Turkish tuning D'addario is about 4.1Kg, I'd be inclined to aim more towards 3.7 - 3.8 Kg rather than jumping all the way up to 4.1 Kg.
Since experimenting with Pyramid is a bit expensive, we could try D'addario first. |
Brian, this sounds like a good test. Can you let me know which D'addario strings would be good for 3.7 - 3.8kg (DGAdgc tuning)? I'll order them from
you of course. Thanks!
|
|
|
spyblaster
Oud Junkie
Posts: 285
Registered: 2-17-2010
Location: Iran - Karaj
Member Is Offline
|
|
As far as I know, Faruk uses Kurschner and Ozten strings on his ouds. let me know if u need those strings.
The Oud is my life, n my life is the Oud
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
I know that. I just don't know exactly which Kurschner set Faruk is using.
Two more things I've realized... Brian said that D'addario uses a tighter winding. I think this causes a less scratchy sound compared to the Pyramid
Lute strings, on the 5th and 6th courses. Additionally, Omar was comparing strings last night after we met and came to the conclusion that the
D'addario strings are a bit thinner, which seems to reduce buzzing.
I recall that the Kurschner strings Faruk used were also on the thin side. What I think I need to do is find the Kurschner set that Faruk used on the
Arabic oud. My best guess is that they were the high tension Turkish set, since those are made for a 58.5 scale length and will be tuned down.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Clarifying a couple of things:
I don't have a problem with the oud itself. I love the oud. The problem has been with my choice of strings, probably exacerbated by my relatively
poor picking habits (working on fixing them), and possibly my choice of pick.
If I used higher tension D'addario strings, they would need to be thicker, which would probably cause issues I wouldn't like. So after thinking about
it more I do think the best course is to try a higher tension Turkish set like the ones Faruk used originally. For me, it has been difficult to find
the ideal strings for Arabic tuning on a 58.5cm oud, with the ideal combination of thickness and tension.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
I chatted with Zeynel Demirtas from Faruk's shop just now on Facebook. He said they (including he and Yurdal Tokcan) use and recommend the following
for the Arabic tuned ouds with c, g, d, A, F, C tuning:
PVF 0,59/ PVF 0,68/ 1012/ 1018/ 1025/ 1240
He also told me that 1025 and 1240 are fine on their ouds even when using G and D. Seems high, but he said he often changes his tuning and it is not
a problem.
|
|
|
PaulS
Oud Junkie
Posts: 101
Registered: 9-7-2013
Member Is Offline
|
|
After trying a lot of things on my Turunz Turkish Oud tuned Arabic I broke down and bought a set of Kurschner Arabic (401104) in their online
catalogue. They are the best thing since sliced bread, so to speak.
|
|
|
DavidJE
Oud Junkie
Posts: 265
Registered: 7-14-2013
Location: Vienna, Austria
Member Is Offline
|
|
Thanks Paul...that is interesting, especially since those are made for a 60cm scale length. I don't know if you have noticed this, but the biggest
problem I have with my Türünz ouds in terms of strings is the 2nd course ("g" in Arabic tuning). This is the course that tends to buzz on both of
my ouds, and also the Türünz oud that a friend of mind had. What we discovered though is that using a thinner string solves the problem.
Chatting with Zeynel yesterday, he told me that they use Özten (old Kürschner) strings on the reduced price ouds and Pyramid Lute strings on the
custom single and double soundboard ouds. He gave me the exact string gauges for the Pyramid Lute sets. I'm going to make another post shortly with
those, since so many people have written about ideal strings on Türünz ouds.
Despite what Zeynel told me, I think Faruk had old Kürschner/Özten strings on both of my ouds...even though one was a custom single. I think these
Özten strings were thinner...not sure what set they were...so they did not buzz badly on the 2nd course.
Experimenting over the last couple of days more than usual, I've found that the Pyramid Lute sets Zeynel recommended sound great (almost identical to
what Brian Prunka recommended), as long as I switch out the 2nd course with a thinner string. That eliminates the bad buzzing sound. I was probably
wrong about tension being the problem.
Part of this is down to my personal taste, too. I don't like buzzing. And I don't like to hear the pick hitting and scratching on the strings. So
I've also found that playing closer to the bridge, in the middle of the pickguard, really helps with this. And, although I used to not like the
"Turkish style" rubber picks...they reduce so much of the scratchy sound that you can get on the 5th and 6th courses, that I'm coming to like them
more.
Anyway, maybe I will try some other Kürschner sets, but I'm thinking that since Zeynel told me the Pyramid Lute strings sound best...and he is both
making and playing the ouds...I'll just stick with them and forget about it.
|
|
|
PaulS
Oud Junkie
Posts: 101
Registered: 9-7-2013
Member Is Offline
|
|
No I didn't know that. How do id you determine they were made for 60 cm? The g is often rather lifeless in other strings but vibrant in the
Kurschners. Bigger problem for me has been a buzzing in the d string
|
|
|
| Pages:
1
2 |
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
