Mike's Oud Forums
Not logged in [Login - Register]
Go To Bottom

Printable Version  
Author: Subject: Method for replacing rosettes
sylvainbd
Oud Junkie
*****




Posts: 404
Registered: 6-7-2005
Location: France - Nantes
Member Is Offline

Mood: Sylent

[*] posted on 9-24-2020 at 11:50 AM
Method for replacing rosettes


Hello I bought a new acoustic oud and I wondered if it is possible to replacing every rosettes without destroy the top ?!
I have a flat back so it could be possible to drill clearly a window to access inside by the back but I don't like at all this idea...
Can I install some new rosettes by holes of soundboard ?
Thanks for your help.




https://sbd-projets.com/en/ouds/
contact@sbd-projets.com
Whatsapp 0033*649197764
View user's profile View All Posts By User
teslim
Oud Junkie
*****




Posts: 106
Registered: 9-12-2006
Member Is Offline

Mood: No Mood

[*] posted on 9-24-2020 at 09:26 PM


yes, not so difficult, you need a thin spatula and patience, you can take out existing rosettes by heating the spatula and slowly go around the area where it is glued to the top until you find a spot you can loosen,,slowly slowly , not using any force slip around the entirety of the rosette ,and it will eventually come loose. you can also use hot water to heat the spatula (keep Heating it over and over) the main thing is not to pry in any way, just keep working the glue with the heated spatula till it releases,,it is also good to keep a thumb or finger on the top above the area you are working to avoid any possibility of pushing a weak spot open,,once it is loose -to remove often times the inner ring has a cut out section that will provide space to maneuver the rosette out, if not you can cut one with a small saw,, the plastic rosettes are also usually bendable , i hope this helps
View user's profile View All Posts By User
sylvainbd
Oud Junkie
*****




Posts: 404
Registered: 6-7-2005
Location: France - Nantes
Member Is Offline

Mood: Sylent

[*] posted on 9-25-2020 at 09:15 AM


Thank you teslim
I ll try soon :)
If somebody got some models I am interested. Bendable rosette is better !...




https://sbd-projets.com/en/ouds/
contact@sbd-projets.com
Whatsapp 0033*649197764
View user's profile View All Posts By User
suz_i_dil
Oud Junkie
*****




Posts: 1064
Registered: 1-10-2008
Member Is Offline

Mood: No Mood

[*] posted on 9-25-2020 at 01:51 PM


All well explained by teslim. But i would just add I is better using alcohol flamme to heat the spatula. It keeps the spatula clean and avoid black deposits on it , will keep the work on the soundboard wood cleaner



View user's profile Visit user's homepage View All Posts By User

  Go To Top

Powered by XMB
XMB Forum Software © 2001-2011 The XMB Group