farukturunz
Oud Junkie
Posts: 569
Registered: 8-16-2005
Location: Istanbul, Turkey
Member Is Offline
Mood: hopeful
|
|
Scientific Research on the Mechanics of the Oud
Dear Friends,
Musical Instrument Physics is one of the most complex branches of the Physics. It is normal for all to have questions in the mind, relating to the
wooden musical instruments and especially their construction techniques; whose complexity can barely be understood if examined with the four basic
Physics disciplines like Mechanics, Mechanical Vibrations, Static and Acoustics in addition to Wood’s Physical Properties, Music and Conceptual
Psychology.
Many of the prevailing information put forward so far attempting to describe how a wooden musical instrument gives sound are either false or none
proved ones by scientific researches.
However, many comprehensive scientific researches have been made on the physical features of the Violin and the Guitar coming first, many of the other
highly developed musical instruments in the western world. But what a pity that many ethnic musical instruments and the Oud despite the growing
interest it gains widespread, have not been scientifically researched.
A SUGGESTION:
I humbly propose to constitute a group of voluntary researchers. The members of this group must be composed of people who have studied or have long
experienced in at least one of the following disciplines – Mathematics, Physics, and Engineering, Computer Programming or musical instrument
construction.
The members of the group must see the task of research as a mission and must consent to consider themselves as devoted volunteers.
With my deepest respect,
Faruk Türünz
|
|
|
Greg
Administrator
Posts: 928
Registered: 7-22-2004
Location: Brisbane, Australia
Member Is Offline
Mood: Serene
|
|
Faruk,
That sounds like an excellent idea. A goup of people, with the right skills, collaborating to improve oud design (and the understanding of the
physics involved).
I only wish I had one of the skills required to participate.
I wish you well with this worthwhile endeavour.
Regards,
Greg
|
|
|
sydney
Oud Junkie
Posts: 579
Registered: 12-9-2003
Location: Down Under
Member Is Offline
Mood: Bastanikar
|
|
I second your wishes Greg
| Quote: | Originally posted by Greg
Faruk,
I only wish I had one of the skills required to participate.
I wish you well with this worthwhile endeavour.
Regards,
Greg |
Me too Master Farouk, I wish I am skilled enough to help.
All the best wishes for your research.
I am sure there are lots of members here rich in knowledge and skills ... like Al Halabi, Jameel, Mavrothis, bill to name a few.
Kind Regards,
------------------
Emad
|
|
|
farukturunz
Oud Junkie
Posts: 569
Registered: 8-16-2005
Location: Istanbul, Turkey
Member Is Offline
Mood: hopeful
|
|
Thank you my friends Greg and Emad, both of you have one very precious skill like incitement. I am also sure there are lots of
knowledgeable and skilful members here.
|
|
|
Peyman
Oud Junkie
Posts: 496
Registered: 7-22-2005
Member Is Offline
Mood: Mahoor
|
|
I think this is a great idea too. There was a scientific analysis of the classical tanbur that I ran into: http://lib.tkk.fi/Diss/2000/isbn9512251965/article4.pdf
There is also an oud based on Kasha design theories that someone made and sent pictures to Dr. Oud. It's in his compeleted ouds sections.
|
|
|
AGAPANTHOS
Oud Addict
Posts: 35
Registered: 2-23-2006
Location: CRETE-GREECE
Member Is Offline
Mood: hopeful
|
|
Dear Master Faruk,
I am very glad that you make this proposal.I think that we share the same ideas. I am willing to support it by all means because i believe that
musical instruments with such a long history and multiple role in the music world worths to profit from the progress of science and technology of our
times.
I 've been searching for several years,to find scientific references on this subject, in many directions,music societies, research centers,and
universities, without any result.
I hope that you still remember me. We have met each other many times and we had long talks on the subject of oud making.I live in Crete and the last
time that we met each other was in your workshop, in Kadikoy- Istanbul where i came to visit you with my oud Master and friend Necati Celik.
I would propose to modify the title of this very important proposal-innitiative by adding the word applied to the scientific research and the word
acoustics to the mechanics. These modifications rephrase the title as follows: "Applied scientific research on oud acoustics and mechanics". I hope
that this is an improved version of your idea, as far as it concerns the scientific terminology.
With my sencere respect,
George
|
|
|
farukturunz
Oud Junkie
Posts: 569
Registered: 8-16-2005
Location: Istanbul, Turkey
Member Is Offline
Mood: hopeful
|
|
| Quote: |
I would propose to modify the title of this very important proposal-innitiative by adding the word applied to the scientific research and the word
acoustics to the mechanics. These modifications rephrase the title as follows: "Applied scientific research on oud acoustics and mechanics". I hope
that this is an improved version of your idea, as far as it concerns the scientific terminology.
With my sencere respect,
George |
Dear George, thank you for your warning to modify the "name" of my proposal. OK my friend. Of course the main target of such a research is to
putforward a concrete outcome which can be applied on different wooden musical instruments. You are completely right for seeking utility at the end.
My real concern -while sharing your thoughts- at the moment is whether we can constitute a voluntary researcher's group to handle the issue or not.
First let's inform people about the idea, as many as we can contact, whether a member of this forums or not. We can denominate this project with the
most appropriate name then. I appreciate your warning. Thank you again.
|
|
|
farukturunz
Oud Junkie
Posts: 569
Registered: 8-16-2005
Location: Istanbul, Turkey
Member Is Offline
Mood: hopeful
|
|
| Quote: | Originally posted by Greg
Faruk,
That sounds like an excellent idea. A goup of people, with the right skills, collaborating to improve oud design (and the understanding of the
physics involved).
I only wish I had one of the skills required to participate.
I wish you well with this worthwhile endeavour.
Regards,
Greg |
I sent a convocation message to the group pages of the turkmusikisi.com website to come together to constitute a scientific research group to
actualize this proposal at the same date I made it in this group.
I have received many replies from mathematicians, computer programmers, physicians and musicians but no any instrument makers. Thus, in accordance
with the prevailing specialty of the people who contacted me so far the attribution of the research seems to be more academic than the one of which
main target is rather practical. Probably later on after the research successfully concludes and the report is published then some instrument makers
may involve in the second stage of the project which will be carried on with the aim of practical utilities.
The scientific experiments will be done at an acoustic laboratory owned by a very young mechanical engineer who is well experienced on mechanical
vibrations and acoustics.
I will inform this group about the progress of the research.
Warm regards,
Faruk Türünz
.
|
|
|
AGAPANTHOS
Oud Addict
Posts: 35
Registered: 2-23-2006
Location: CRETE-GREECE
Member Is Offline
Mood: hopeful
|
|
Dear Master Faruk,
With my response to your proposal i wanted to confirm to you my willing to support it by all means and also my interest to participate in this team
which will run one or several autonomous but well articulated applied scientific researches on the acoustics and the mechanics of the oud, with my
expertise as an instrument maker.
We can undertake this effort in a totally voluntary basis or we can build a research project which could be financed and implemented in the context
of the research activity of one research center/university, or of two research centers,located in two countries, in collaboration.
I have in mind to contact and inform several institutions and academics in Greece ( Polytechnic School of Thessaloniki- Mechanical Engineering, the
Acoustical Society of Greece ,e.t.c.)on your proposal but I think that is better to have your opinion in advance.
I have in mind that there are a lot of alternative techniques and technologies available and capable to test scientifically the acoustic and
mechanical proprieties and the behavior of a wooden instrument (ultrasonic, holography, speckled interferometry,F.E.A. e.t.c.) I rather believe that
it is better to give more time to talk and exchange our thoughts between each other in the context of the forum, instead of giving a wide publicity
of your proposal, at once.
My opinion is that as far as concern, in general, the planning and the implementation of this effort is much better to run a /or several research
project(s) in the context of the typical academic society.
With my sencere respect,
George
|
|
|
farukturunz
Oud Junkie
Posts: 569
Registered: 8-16-2005
Location: Istanbul, Turkey
Member Is Offline
Mood: hopeful
|
|
Dear Friends,
The idea has echoed through the academic environment and received serious interest from some prominent experienced researchers who have served in some
scientific research projects dealing with several musical purviews so far. The attribute of this proposal seems more susceptible to be an academic one
rather than one which could be handled by a voluntary group consisting of people who can deal with the issue in an amateurish approach.
This particularity has a basic importance as stated by one of the friends who is an academician: A proposal like this no doubt should come from a
civil initiative movement. But it seems necessary to be executed under the academic umbrella of a university to reach an accredited outcome and to
show that it is a totally academic-oriented one as well.
George, do you thing that it is easy to provide and establish a collaboration on this project between two countries’ universities? I wish we could
help to realize this.
Warm regards,
Faruk Türünz
|
|
|
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
